Sleeping Draught Recipe

Points acquired: 11 points

Brewing time:
Pewter Cauldron : 70 minutes
Brass Cauldron : 60 minutes
Copper Cauldron : 53 minutes

Actual video demonstration for this potion can be found here.

When adding lavender to mortar in Step 1, make sure all the petals drop into the mortar. One or two errant petals will be fine, but if there are too many petals dropping to the table you will fail to brew this draught. "You put lavender into the wrong container" is the failure message for this one.
Tips for the lavender petals are that you either hold it vertically on top of the mortar, or you put it horizontally directly on top of the mortar. This really depends on the person doing the draught and the sensitivity of your mouse or touchpad. Do whatever is best for you.
When adding the flobberworm mucus into the cauldron in Step 4, stop AS SOON AS the counter reads 2. If you add more, you'll fail to brew this draught.
When heating in step 6 of the first half, use the off and low heat fire control to make sure the temperature stays between the lines. Red temperature means failure.
In the second half of the potion, you will have to be fast to add valerian sprigs and stir. The 1 minute heating will consume most of your time. Another way to do this is you put the valerian sprigs and stir while you are heating.
If you make mistakes during the brewing, pressing back will take you back to potion book page and you can start over. Note that as of the new update, you will lose your ingredients when you start over even though you did not wave your wand.
As soon as you see BLACK or GREEN smoke coming from your cauldron, click the REFRESH button ASAP to avoid melting your cauldron.

(Above images and tips provided by RainAsh69 and CloakEye178; Video provided by ShadowJinx26)

GryffinRoar- A Pottermore Help Site